PlayTrail Guide

Enshrouded: FSR 4.1 AMD GPU Setup

Published · Updated · Current patch · Last checked 2026-10-16

A fantasy wilderness scene viewed from a rocky cave, with ruined structures, dry grass, distant mountains, and warm sunlight.
Official artwork for Enshrouded.

To use FSR 4.1 in Enshrouded with an AMD GPU, install OptiScaler in the folder containing enshrouded.exe, run its setup script with the winmm.dll injection method, enable Nvidia spoofing, and then select DLSS in the game before switching the active upscaler to FSR 3.X/4 w/Dx12 through the in-game OptiScaler menu. The w/Dx12 option is required for this setup.

Install OptiScaler

  1. Download a recent OptiScaler release from the developer's official GitHub release page. Version 0.9.4 or newer is recommended.
  2. In Steam, open Enshrouded's local files by right-clicking the game, choosing Manage, and selecting Browse local files.
  3. Extract every file from the OptiScaler ZIP archive directly into the folder that contains enshrouded.exe. Do not place the files in a separate subfolder.

Configure the injection and GPU settings

  1. Open the Enshrouded installation folder and run setup_windows.bat.
  2. When the setup window asks for an injection method, enter 2 to use winmm.dll.
  3. Choose your graphics hardware type: select AMD for an AMD GPU, or Intel if that is the applicable hardware option.
  4. When setup asks about spoofing, enable Nvidia spoofing by choosing Yes, entering 1, and pressing Enter. This is needed because the game normally hides its DLSS option from AMD users.

Older RX cards

If FSR 4 does not appear after setup, open OptiScaler.ini in the game folder. Find Fsr4Update. If it is set to false or Auto, change it to:

Fsr4Update=true

Activate FSR in Enshrouded

  1. Start Enshrouded and open Settings > Graphics.
  2. For the anti-aliasing or upscaling option, choose DLSS, not the game's native FSR option. OptiScaler needs the DLSS path for this replacement.
  3. Select a quality preset, such as Quality, then load a save and enter the game world. The OptiScaler menu is not available from the main menu.
  4. While controlling your character in the world, press Insert to open the OptiScaler overlay.
  5. In the upper-left Upscalers section, open the algorithm list and choose FSR 3.X/4 w/Dx12.
  6. Press Change Upscaler, then select the desired preset. The default preset is described as Default - Preset 1, corresponding to Quality or Ultra Quality; lower-quality presets produce a less clear image.
  7. At the bottom of the overlay, press the blue Save Settings button. Press Insert again to close the menu.

Important selection check

Do not select a similarly named option without w/Dx12. Enshrouded uses Vulkan, so this DX12 bridge variant is the required choice in the supplied setup. If the game still shows only the original options, recheck that all archive files were extracted beside enshrouded.exe, that setup used injection method 2, that Nvidia spoofing was enabled, and that the replacement was selected after entering a saved game.

More Enshrouded guides